One for All Universal Remote URC 8910 User Manual

A/V LCD 8-DEVICE WITH LEARNING

UNIVERSAL REMOTE CONTROL (URC-8910)

User’s Guide

Download from Www.Somanuals.com. All Manuals Search And Download.

INTRODUCTION

The One For All A/V LCD 8-Device With Learning Universal Remote

Control (URC-8910) is our latest high-performance universal

remote control. It is designed to operate up to eight home entertain-

ment devices, including TV, video, and audio components. Moreover,

this remote control contains sophisticated technology that will allow

you to conveniently consolidate the clutter of all of the original

remote controls used in your home entertainment system. It’s

packed with easy-to-use features such as:

• Advanced Liquid Crystal Display (LCD) with 15 alphanumeric

characters, real-time clock, and icons for constant visual feedback

of operations and programming sequences

• A unique Home Theater mode that combines different device

controls under one mode for operating convenience

• Three macro keys for instant activation of favorite key sequences

• Four learning keys to capture unique functions from your

devices’ original remote controls

• Key Mover for copying keys from one device to another, or to a

different position in the same mode

• Code Search to help you program device codes without using the

code list (starting on page 14) or for brands or models not listed

• Favorite Channel Scan for easy channel surfing

• Mode reassignment to control duplicate types of devices

• Volum e Lo ck to assign volume controls to individual devices or to

one global device

• Commercial Skip feature allows you to channel surf during

commercial interruptions of your favorite programs

• Pre-programmed database with the world’s largest and most

efficient group of infrared codes insures device compatibility

• Internal modem for upgrading device codes over the telephone

• A low battery icon to notify you when batteries are getting low

• Backlighting feature to aid operation in low ambient light

The One For All A/V LCD 8-Device With Learning Universal Remote

Control (URC-8910) requires four (4) new AAA alkaline batteries

(not included) and easy programming to control your devices. For

best results, please read and perform all instructions listed here.

Also, keep these instructions for future reference.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLING BATTERIES

❶

❷

❸

On the back of the URC-8910 remote control, push

the tab and lift off the battery cover.

Obtain four (4) new AAA alkaline batteries. Match

the + and – marks on the batteries to the + and –

marks in the case, and then insert the new batteries.

Align the cover key with the case opening and

replace the cover until it locks.

If batteries are inserted correctly, the entire LCD

will turn on.After 5 seconds of inactivity, the remote

control will turn itself off to conserve battery life.

Perform the steps in Setting The Clock (on the next

page) to set the correct time.

NOTE: When a battery icon appears in the display (see page 7, Key Charts,

LCD), the batteries are low. Simply replace them and the URC-8910 remote

control will be restored to full functionality, complete with your favorite settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTING THE CLOCK

On the URC-8910 remote control, press and hold

SET until you see the display change from the default

device and time to [CODE SET].

NOTE: Default values for device, its code, and time are

shown above.Your remote control settings may be different.

NOTE: If you wish to exit the programming mode at any

time, press EXIT once. You will see an [EXIT] message as the

remote control returns to normal operation.

NOTE: If you see an [INVALID] message, you have inadver-

tently pressed an incorrect key. Simply note your error and

continue programming.

(x 5) Press the L key five times until you see the display

change to [CLOCK SET].

NOTE: If you go past [CLOCK SET], press the M key one or

more times to return to it.

Press SELECT once to begin programming.You will

see the display change to the current time.

Press the L key one or more times until you see the

desired hour (a.m. or p.m.).

Press the M key one or more times until you see the

desired minute.

Once the time is correctly set, press SELECT once to

accept the values. The display will confirm your

entry with [SUCCESS] and then [EXIT SETUP].

The URC-8910 remote control will return to

normal operation.

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURES AND FUNCTIONS

Use the illustration below to locate features on the URC-8910 remote

control and then study the Key Charts (on the next three pages) to

learn how they function.

Download from Www.Somanuals.com. All Manuals Search And Download.

Key Charts

The LED (red light) blinks to show that the

remote control is working and sending signals.

The LCD (Liquid Crystal Display)

provides 15 alphanumeric charac-

ters that display status messages

during remote control operation

and programming.Also, one or

more icons appear in the LCD to

indicate the following conditions:

Morning or Afternoon Time

Low Battery

IR Signal Transmission

Press TV, VCR, DVD, AUX, SAT, CBL,

RCVR/AMP, or CD once to select a

desired home entertainment

device to control.

After programming, press HOME

THEATER once to select the home

theater mode. See Using The Home

Theater Mode on page 43.

Press POWER once to turn on or off the

selected device.

Use the cursor keys (L, M, , or ) to move

the cursor in the program guide and menu

screens. Use SELECT to choose options from

your selected device’s menu or guide.

In the CD mode, use SELECT to select a

compact disc. Use L (or M) to select the next

(or previous) CD. Use (or ) to select the

next (or previous) track.

In the RCVR/AMP mode, use SELECT to

set the surround sound. Use L (or M) to

adjust the volume higher (or lower). Use

(or ) to adjust the balance left (or right).

Press MENU once to display your selected

device’s main menu.

Use GUIDE to display your selected device’s

program guide or setup menu.

continued on next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURES AND FUNCTIONS

Key Charts (continued)

Use EXIT to exit from your selected device’s

guide or menu.

Use INFO to display the current channel and

program information.

Use VOL+ (or VOL-) to raise (or lower) the

audio volume.

Press MUTE once to turn the audio off

or on.

In the TV, VCR, DVD, SAT, and CBL modes,

use FAV to scan favorite channels and/or all

channels. See Using Channel Scan and Program-

ming Favorite Channel Scan on page 41.

Use CH+ (or CH-) to select the next higher (or

lower) channel.

Press PREV once to recall the last-viewed

channel and to page back one screen on the

main menu.

In the CD mode, use PREV to turn random

play on or off.

In the RCVR/AMP mode, use PREV to select

the receiver band.

Use the keypad (1 ~ 9 and 0) to

directly select channels (e.g., 009 or

031).

In the RCVR/AMP mode, use the

keypad (1 ~ 9 and 0) to select audio

sources 1 through 10.

Press ENTER once after entering the channel

numbers on some TVs.

In the CD mode, use ENTER to add 10 to the

digit entry (e.g., ENTER and 7 is 17).

Use TV/VID to switch the TV’s input to view

TV or video programs.

Download from Www.Somanuals.com. All Manuals Search And Download.

Use the transport keys to control your

VCR, DVD or CD player, or VOD (Video

On Demand) if available on your cable

or satellite service.

To record a VCR program, press REC

twice.

Use SLEEP to activate your device’s sleep

timer (not available for all devices).

After programming, press M1 ~ M3 once to

run a desired macro (see Using Macros on

page 34).

After programming, press L1 ~ L4

once to activate a learned function.

See Using Learning on page 30.

Use PIP to switch the Picture-In-Picture

feature on or off (if available on your TV).

Use MOVE to move the window picture

to different positions in the main picture.

Use SWAP to switch images and sound

between the main and window pictures.

After programming, use COM SKIP to skip

commercials on selected devices (i.e., TV, VCR,

DVD, CBL, and SAT). See Using Commercial

Skip on page 48.

Use to turn on or off the key backlight.

When this feature is activated, keys will

remain backlit for 5 seconds after the last key

press. In the setup mode, backlighting

will remain on for 30 seconds.

Use SET for all programming sequences.

Download from Www.Somanuals.com. All Manuals Search And Download.

PROGRAMMING DEVICE CONTROL

The URC-8910 remote control is preprogrammed at the factory to

operate an RCA TV and VCR, a Motorola (GI) cable converter, an RCA

satellite receiver, a Pioneer CD player, a Toshiba DVD player, a Pioneer

audio receiver/ amplifier, and a One For All home automation device.

To control devices other than the default brands, perform the follow-

ing steps and repeat them as needed for each device to be pro-

grammed; otherwise skip this section:

NOTE: For TV/VCR Combo control, see “Programming TV/VCR Combo

Control” on page 12.

Turn on a device (e.g.,VCR or DVD player) and, if

applicable, insert media (e.g., cassette or disc).

NOTE: Please read steps 2 through 8 completely before

proceeding. Highlight or write down the codes and device

you wish to program before starting step 2.

On the URC-8910 remote control, press and hold

SET until you see the display change from the cur-

rent device and time to [CODE SET].

NOTE: The device, its code, and time are examples. Your

remote control settings may be different.

NOTE: To exit programming at any time, press EXIT once or

allow 30 seconds of inactivity to lapse. You will see [EXIT

SETUP] as the remote control returns to normal operation.

NOTE: [INVALID] means you have inadvertently pressed an

incorrect key. Note your error and continue programming.

Press SELECT once to begin programming.You will

see the display change to the last-selected device

and its current code (e.g., TV and 0051).

Press a desired device key once (e.g., VCR).You will

see the display change to the desired device and its

current code (e.g., VCR and 0035).

NOTE: Use the AUX key to program control of home

automation devices, video accessories, audio services, and

other audio or video devices. Alternately, use the AUX key to

program control of a second device type (e.g., a second VCR;

see “Re-assigning Device Keys” on page 37).

Use the Manufacturer’s Codes (starting on page 14)

to locate the type of device and brand name. Then

use the keypad to enter the first four-digit code for

your device and press SELECT once.

Download from Www.Somanuals.com. All Manuals Search And Download.

For example, to enter the first GE VCR code (on

page 24), press 0 twice, 6 once, 0 once, and then

SELECT once.

If the code is entered correctly, you will see the

[SUCCESS] message.

Press EXIT to exit the programming mode.You will

see an [EXIT SETUP] message as the URC-8910

remote control returns to normal operation.

To verify the code works, aim the URC-8910 remote

control at the desired device, press its device key

once and then press POWER once. The device should

turn off. If it does not respond, repeat steps 2

through 6, trying each code for your brand until you

find one that works. If it still does not work, try

Searching For Your Code on page 27.

NOTE: If the device does not have a POWER key, press the

(Play) key.

Repeat steps 1 through 7 for each device you want

to control. For future reference, write down each

working device code in the boxes below:

TV Code:

VCR Code:

DVD Code:

SAT Code:

CBL Code:

RCVR/AMP

Code:

CD Code:

AUX Code:

Aux. Device

Type:________________________________

Download from Www.Somanuals.com. All Manuals Search And Download.

PROGRAMMING TV/VCR COMBO CONTROL

Perform the following instructions to control a TV/VCR Combo:

Turn on the TV/VCR Combo and insert a video

cassette.

NOTE: Please read steps 2 through 9 completely before pro-

ceeding. Highlight or write down the codes and device you

wish to program before starting step 2.

On the URC-8910 remote control, press and hold

SET until you see the display change from the cur-

rent device and time to [CODE SET].

NOTE: The device, its code, and time are examples.Your

remote control settings may be different.

NOTE: To exit programming at any time, press EXIT once or

allow 30 seconds of inactivity to lapse. You will see [EXIT

SETUP] as the remote control returns to normal operation.

NOTE: [INVALID] means you have inadvertently pressed an

incorrect key. Note your error and continue programming.

Press SELECT once to begin programming.You will

see the display change to the last-selected device

and its current code (e.g., TV and 0051)

Press VCR once.You will see the display change to

[VCR] and its current code.

Use the Setup Codes For TV/VCR Combos (on

page 22) to locate the type of device and brand

name. Then use the keypad to enter the first four-

digit code for your device and press SELECT once.

For example, to enter the first Sony TV/VCR Combo

code on page 23, press 0 four times and then

SELECT once.

If the code is entered correctly, you will see the

[SUCCESS] message.

NOTE: If your TV/VCR Combo has a separate TV code, you

will also need to perform step 6.

Download from Www.Somanuals.com. All Manuals Search And Download.

(Optional) Skip this step if your TV/VCR Combo

does not have a separate TV code. Otherwise, press

TV once.You will see the display change to [TV] and

its current code.

Use the keypad to enter the separate TV code for

your device.

Press EXIT to exit the programming mode.You will

see [EXIT SETUP] as the URC-8910 remote control

returns to normal operation.

To verify the code works, aim the URC-8910 remote

control at the desired device, press VCR once and

then press POWER once. The TV/VCR Combo

should turn off. If it does not respond, repeat steps 2

through 8, trying each code for your brand until you

find one that works. If it still does not work, try

Searching For Your Code on page 27.

NOTE: If the device does not have a POWER key, press the

(Play) key.

NOTE: For VCR/TV Combos programmed with separate TV

codes, TV volume is controlled by pressing VCR first and

then TV. After that, use VOL+ (or VOL-) to raise (or lower)

the TV volume. For other alternatives on controlling volume

keys, see “Changing Volume Lock” on page 32 or “Using

Keymover” on page 38.

For future reference, write down the working

TV/VCR combo code in the below boxes:

TV/VCR Code:

TV Code

(if used):

Download from Www.Somanuals.com. All Manuals Search And Download.

SEARCHING FOR YOUR CODE

If your device does not respond to the URC-8910 remote control

after trying all codes listed for your brand, or if your brand is not

listed at all, try manually searching for your code.

For example, to manually search for a code for your TV:

Turn on the TV.

On the URC-8910 remote control, press and hold

SET until you see the display change from the

current device and time to [CODE SET].

NOTE: The device, its code, and time are examples. Your

remote control settings may be different.

NOTE: To exit programming at any time, press EXIT once or

allow 30 seconds of inactivity to lapse. You will see [EXIT

SETUP] as the remote control returns to normal operation.

NOTE: [INVALID] means you have inadvertently pressed an

incorrect key. Note your error and continue programming.

Press the M key once until you see the display

change to [MAN SEARCH].

NOTE: If you go past [MAN SEARCH], press the L key one or

more times to return to it.

Press SELECT once to begin programming.You will

see the display change to the last-selected device

and its code (e.g., VCR and 0035).

Press a desired device key once (e.g., TV).You will

see the display change to the desired device and the

first code in the manual search list (e.g., TV and

0047).

Aim the URC-8910 remote control at the device

(e.g., TV) and press SELECT once.You will see the

LED (red light) blink and the

(IR) icon flash

indicating IR codes are being transmitted.

continued on next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

SEARCHING FOR YOUR CODE (continued)

NOTE: In the manual search mode, the URC-8910 remote

control will send IR codes from its library to the selected

device, starting with the most popular code first.

If the device (e.g., TV) turned off, skip to the next

step. If it did not turn off, aim the URC-8910 remote

control at the device (e.g., TV) and press the L key

once to advance the manual search to the next code

(e.g., TV and 0054).Again you will see the LED (red

light) blink and the

(IR) icon flash.

Repeat this step as often as needed until you find a

code that turns off the device.

To save the working code, press SELECT once. The

display will confirm your entry with [SUCCESS] and

then [EXIT SETUP].

The URC-8910 remote control will return to

normal operation.

NOTE: For future reference, write down the working device

code in the appropriate boxes on page 11.

To perform a manual code search for another

device, repeat steps 1 through 8, but this time (in

step 5) substitute the appropriate device key for the

device you are searching for.

NOTE: If you have not found a working device code after trying the above

procedure, please contact our customer service center to upgrade your

One For All A/V LCD 8-Device With Learning Universal Remote Control

(URC-8910). See “About Upgrading” on page 51.

Download from Www.Somanuals.com. All Manuals Search And Download.

USING LEARNING

Program the learning keys (L1~ L4) to add functions that are

unique to your home entertainment devices (e.g.,VCR Tracking Up

or Down). However, there are some considerations:

• Your original remote control must be in working order for the

learning feature to work properly.

• Learned keys are mode specific, so each one can store a unique

function for each mode.

• Learned keys can be used in macros (see Using Macros on page 34).

• Although dedicated keys (L1~ L4) are provided for storing

learned functions, you can also use any key (except keys for

devices and programming) for learning. However, using them as

learned keys will overwrite their original functions.

• For optimum learning, avoid high levels of ambient light such as

natural sunlight or energy-efficient fluorescent lights.

NOTE: Please have your original remote controls handy before programming

learning. Be sure to press each key within 5 seconds of the previous entry.

If not, the URC-8910 remote control will exit the programming mode.

Programming A Learning Key

On the URC-8910 remote control, press and hold

SET until you see the display change from the cur-

rent device and time to [CODE SET].

NOTE: The device, its code, and time are examples. Your

remote control settings may be different.

NOTE: To exit programming at any time, press EXIT once or

allow 30 seconds of inactivity to lapse. You will see [EXIT

SETUP] as the remote control returns to normal operation.

NOTE: [INVALID] means you have inadvertently pressed an

incorrect key. Note your error and continue programming.

(x 2) Press the M key twice until you see the display

changes to [IR LEARN].

NOTE: If you go past [IR LEARN], press the L key one or

more times to return to it.

Press SELECT once to begin programming.You will

see the display change to the last-selected device

(e.g., TV).

continued on next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

USING LEARNING

Programming A Learning Key (continued)

Press a device key once (e.g., TV) to assign a desired

mode for learning.

Select an open learning key (e.g., L1) and press it

once.You will see the display change to [LEARNING]

and the LED (red light) will turn on for 5 seconds.

Place your original remote control (e.g., TV remote

control) head-to-head (about 2" apart) from the

URC-8910 remote control.

On your original remote control, press and hold the

key (i.e., feature) to be learned until until you see

[SUCCESS] appear on the URC-8910 remote control.

The display will return to device mode you selected

for learning (e.g., TV).

If the key was not learned, you will see an [ERROR]

message instead.

Repeat steps 5 through 7 as needed to achieve

[SUCCESS].

To learn functions onto other learning keys (e.g., L2

~ L4), repeat steps 4 through 7 for each key.

Press EXIT to exit the programming mode.You will

see an [EXIT SETUP] message as the remote control

returns to normal operation.

10.

To test a learned feature, aim the URC-8910 remote

control at the desired device and press its device key

once (e.g., TV, where the learning mode was

assigned). Then press the learning key (e.g., L1)

Download from Www.Somanuals.com. All Manuals Search And Download.

where the learned feature is stored. The feature

should activate. If not, try the programming the

learning key again, starting with step 1 (on page 29).

Deleting A Function From A Learning Key

On the URC-8910 remote control, press and hold

SET until you see the display change from the cur-

rent device and time to [CODE SET].

NOTE: The device, its code, and time are examples. Your

remote control settings may be different.

NOTE: To exit programming at any time, press EXIT once or

allow 30 seconds of inactivity to lapse. You will see [EXIT

SETUP] as the remote control returns to normal operation.

NOTE: [INVALID] means you have inadvertently pressed an

incorrect key. Note your error and continue programming.

(x 3) Press the M key three times until you see the display

change to [IR DELETE].

NOTE: If you go past [IR DELETE], press the L key one or

more times to return to it.

Press SELECT once to begin programming.You will

see the display change to the last-selected device

(e.g., TV).

Press a device key once (e.g., TV) for the mode that

contains the learned function.

Press learning key once (e.g., L1) where the feature

(to be deleted) is stored.You will see the display

change to [DELETED] and then return to last-selected

mode (e.g., TV).

If desired, repeat steps 4 and 5 to delete other

learned functions.

Press EXIT to exit the programming mode.You will

see an [EXIT SETUP] message as the URC-8910

remote control returns to normal operation.

Download from Www.Somanuals.com. All Manuals Search And Download.

USING VOLUME LOCK

In its default (unlocked) state, the URC-8910 remote control allows

each device to control its own volume only in its own mode (e.g., TV

volume in the TV mode, VCR volume in VCR mode, etc.). However,

using our Volum e Lo ck feature, you can lock the volume controls for

each device to all modes (e.g., RCVR/AMP volume in all modes).

Moreover, using the Volume Unlock feature (see the next page),

you can further customize the settings so that a device’s volume

controls are unlocked in one mode, but remain locked in all other

modes (e.g., TV volume in the TV mode and RCVR/AMP volume in

other modes).

Programming Volume Lock

On the URC-8910 remote control, press and hold

SET until you see the display change from the cur-

rent device and time to [CODE SET].

NOTE: The device, its code, and time are examples. Your

remote control settings may be different.

NOTE: To exit programming at any time, press EXIT once or

allow 30 seconds of inactivity to lapse. You will see [EXIT

SETUP] as the remote control returns to normal operation.

NOTE: [INVALID] means you have inadvertently pressed an

incorrect key. Note your error and continue programming.

(x 4) Press the M key four times until you see the display

change to [VOL LOCK].

NOTE: If you go past [VOL LOCK], press the L key one or

more times to return to it.

Press SELECT once to begin programming.You will

see the display change to [TO MODE].

Press a mode key (e.g., RCVR/AMP) to lock a device’s

volume controls to all modes.You will see the display

change to [SUCCESS] and then [EXIT SETUP] as the

remote control automatically exits the programming

mode and returns to normal operation.

If desired, repeat steps 1 through 4 as needed to lock

volume controls for other devices to all modes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming Volume Unlock

On the URC-8910 remote control, press and hold

SET until you see the display change from the

current device and time to [CODE SET].

(x 5) Press the ^Mkey five times until you see the display

change to [VOL UNLOCK].

NOTE: If you go past [VOL UNLOCK], press the L key one or

more times to return to it.

Press SELECT once to begin programming.You will

see the display change to [ALL MODE].

To unlock one mode, skip to step 4. Otherwise press

SELECT once to unlock all modes.You will see the

display change to [UNLOCKED] and then [EXIT SETUP]

as the remote control automatically exits the pro-

gramming mode and returns to normal operation.

(Optional) Press L (or M) once.You will see the

display change to [ONE MODE].

a. Press SELECT once.You will see the display change

to [SEL MODE].

b. Press a mode key once (e.g., TV) to unlock it.

You will see the display change to [UNLOCKED]

and return to [SEL MODE].

c. If desired, repeat step 4b as needed to unlock

volume controls for other devices. Otherwise,

press EXIT to exit the programming mode.You

will see an [EXIT SETUP] message as the remote

control returns to normal operation.

Download from Www.Somanuals.com. All Manuals Search And Download.

USING MACROS

With programming, the M1 through M3 keys on your URC-8910

remote control can be setup to perform repetitive, time-consuming

operations for easy, convenient access through the press of a single

key. Macro keys are ideal for home theater operations, setting a

favorite channel, guide steps, or other multiple functions you would

like to control with one key press. Moreover, each macro key can

hold up to15 key presses total.

NOTE: Programming a new macro over an existing one will erase the

original macro.

Programming A Favorite Channel

With so many channels available through your cable or satellite

system provider, you can program a macro that directly selects a

favorite channel with one key press. For example, let’s assume your

favorite cable programs are on channel 71. Perform the following

steps to program a macro key for direct access of this channel:

NOTE: This example assumes the TV tuner is connected directly to the cable

line and not through a cable converter.

On the URC-8910 remote control, press and hold

SET until you see the display change from the cur-

rent device and time to [CODE SET].

NOTE: The device, its code, and time are examples. Your

remote control settings may be different.

NOTE: To exit programming at any time, press EXIT once or

allow 30 seconds of inactivity to lapse. You will see [EXIT

SETUP] as the remote control returns to normal operation.

NOTE: [INVALID] means you have inadvertently pressed an

incorrect key. Note your error and continue programming.

(x 6) Press the M key six times until you see the display

change to [KEY MACRO].

NOTE: If you go past [KEY MACRO], press the L key one or

more times to return to it.

Press SELECT once to begin programming.You will

see the display change to [SEL MACKEY].

Select an open macro key (e.g., M1) and press it

once.You will see the display change to [ENTER SEQ].

Download from Www.Somanuals.com. All Manuals Search And Download.

Enter a macro sequence of up to 15 keys. For our

example, press the following keys once in this order:

TV - 7- 1

NOTE: If you have access to over 100 channels, add a 0

before the channel numbers (e.g., 0-7-1). If the original

remote control required pressing an Enter key to change the

channel, also press the Enter key after the channel number

(e.g., 0-7-1-ENTER).

NOTE: An [ERROR] message, followed by [MAX = 15] alerts

you that the macro sequence must be 15 keys or less.

After pressing the first key (in the macro sequence),

you will see the display change to [SEL TO END]. This

message acts as a reminder to use SELECT to end the

sequence (see next step).

To end the macro sequence, press and hold SELECT

until you see [SUCCESS] appear in the display,

followed by [EXIT SETUP]. The URC-8910 remote

control will automatically exit the programming

mode and return to normal operation.

Now when you press M1, you will instantly see cable channel 71 on

your TV set.

Programming A Master Power Key With Instant

Channel Selection

A macro key can be programmed to turn on and off your devices as

well. For example, let’s set up a sequence that will turn on the TV

and tune it to channel 3, and then turn on the cable converter and

tune it to a premium channel (e.g., 11).

NOTE: This example assumes all equipment is turned off and that the TV is

connected through the cable converter with TV tuning set to channel 3.

Perform steps 1 through 4 of the previous section,

Programming A Favorite Channel on page 34.

However, this time in step 4, substitute another open

macro key (e.g., M2).

Enter a macro sequence of up to 15 keys. For our

example, press the following keys once in this order:

CBL - POWER - TV - POWER- 0- 3 - CBL- 1- 1

NOTE: If you have access to over 100 channels, add an 0

before each set of channel numbers (e.g., 0-0-3 and 0-1-1).

If the original remote control required pressing an Enter key

to change the channel, also press the Enter key after each

channel number (e.g., 0-0-3-ENTER and 0-1-1-ENTER).

continued on next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

USING MACROS

Programming A Master Power Key With Instant

Channel Selection (continued)

NOTE: An [ERROR] message, followed by [MAX = 15] alerts

you that the macro sequence must be 15 keys or less.

After pressing the first key (in the macro sequence),

you will see the display change to [SEL TO END].

This message acts as a reminder to use SELECT to

end the sequence (see next step).

To end the macro sequence, press and hold SELECT

until you see [SUCCESS] appear in the display,

followed by [EXIT SETUP]. The remote control will

automatically exit the programming mode and return

to normal operation.

Now when you press M2 once, the cable converter and TV will turn

on, the TV will tune to channel 03, and then the cable converter will

tune to channel 11.

Clearing A Macro

Perform steps 1 through 4 of the earlier section,

Programming A Favorite Channel on page 34.

However, this time in step 4, select a macro key you

want to be cleared (e.g., M1 ~ M3).

Press and hold SELECT to clear the macro key.

You will see the display change to [SEL TO END]. This

message acts as a reminder to use SELECT to end the

sequence (see next step).

Continue pressing SELECT until you see [SUCCESS]

appear in the display, followed by [EXIT SETUP]. The

URC-8910 remote control will automatically exit the

programming mode and return to normal operation.

Download from Www.Somanuals.com. All Manuals Search And Download.

RE-ASSIGNING DEVICE KEYS

The URC-8910 remote control can control a second TV,VCR, DVD

player, or other device by using the Mode Map feature. For example,

to control a TV, a cable converter, and two VCRs, you will need to re-

assign the unused AUX key to operate the second VCR as follows:

On the URC-8910 remote control, press and hold

SET until you see the display change from the cur-

rent device and time to [CODE SET].

NOTE: The device, its code, and time are examples. Your

remote control settings may be different.

NOTE: To exit programming at any time, press EXIT once or

allow 30 seconds of inactivity to lapse. You will see [EXIT

SETUP] as the remote control returns to normal operation.

NOTE: [INVALID] means you have inadvertently pressed an

incorrect key. Note your error and continue programming.

(x 7) Press the M key seven times until you see the display

change to [MODE MAP].

NOTE: If you go past [MODE MAP], press the L key one or

more times to return to it.

Press SELECT once to begin programming.You will

see the display change to [FROM MODE].

Select a mode to be copied (e.g., VCR) and press it

once.You will see the display change to [TO MODE].

Select a mode to be re-assigned (e.g., AUX) and

press it once.You will see the display change to

[SUCCESS], followed by [EXIT SETUP]. The URC-8910

remote control will automatically exit the program-

ming mode and return to normal operation.

The AUX key is now ready to be programmed as

your second VCR. See Programming Device Control

on page 10.

continued on next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

RE-ASSIGNING DEVICE KEYS (continued)

To re-assign other device keys to the AUX key, repeat steps 1 through

6 on the previous page but substitute the key sequence from the

below chart:

To Re-Assign Device Key

AUX as 2nd TV key:

Perform Sequence

SET*- M(x 7) - SELECT - TV - AUX

SET*- M(x 7) - SELECT - DVD- AUX

SET*- M(x 7) - SELECT - SAT- AUX

SET*- M(x 7) - SELECT - CD- AUX

SET*- M(x 7) - SELECT - CBL - AUX

SET*- M(x 7) - SELECT - RCVR/AMP - AUX

AUX as 2nd DVD key:

AUX as 2nd SAT key:

AUX as 2nd CD key:

AUX as 2nd CBL key:

AUX as 2nd RCVR/AMP key:

*NOTE: Press and hold SET (see step 1 on previous page).

You can also re-assign another unused device key by substituting an

open key for the AUX key in the above chart and performing the

sequence. For example, to re-assign an unused SAT key as a second

CD key, perform SET*- M (x 7) - SELECT - CD - SAT.

USING KEYMOVER

The URC-8910 remote control includes a Keymover feature that

allows you to map (or copy) keys from one mode (i.e., source mode)

to another mode (i.e., destination mode).

NOTE: The following keys cannot be used as a source or destination: TV, VCR,

DVD, AUX, SAT, CBL, RCVR/AMP, CD, HOME THEATER, and SET.

Programming Keymover

For example, if your VCR does not have volume control, try mapping

the volume and mute keys from TV mode to VCR mode as follows:

On the URC-8910 remote control, press and hold

SET until you see the display change from the cur-

rent device and time to [CODE SET].

NOTE: The device, its code, and time are examples. Your

remote control settings may be different.

NOTE: To exit programming at any time, press EXIT once or

allow 30 seconds of inactivity to lapse. You will see [EXIT

SETUP] as the remote control returns to normal operation.

NOTE: [INVALID] means you have inadvertently pressed an

incorrect key. Note your error and continue programming.

(x 8) Press the M key eight times until you see the display

change to [KEYMOVER].

Download from Www.Somanuals.com. All Manuals Search And Download.

NOTE: If you go past [KEYMOVER], press the L key one or

more times to return to it.

Press SELECT once to begin programming.You will

see the display change to [FROM MODE].

Select a source mode (e.g., TV) and press it once.You

will see the display change to [FROM KEY].

Select a source key (e.g., VOL+) and press it once.

You will see the display change to [TO MODE].

Select a destination mode (e.g., VCR) and press it

once.You will see the display change to [TO KEY].

Select a destination key (e.g., VOL+) and press it

once.You will see the display change to [SUCCESS],

followed by [EXIT SETUP]. The URC-8910 remote

control will automatically exit the programming

mode and return to normal operation.

Repeat steps 1 through 7 twice more, substituting

VOL– and MUTE as source and destination keys in

steps 5 and 7.

Upon completion of the above procedure, you can now use your

URC-8910 remote control to control the TV’s volume and mute in

the VCR mode, as well as in the TV mode.

Restoring Keymoved Keys to Default Settings

Restoring A Single Keymoved Key

Perform steps 1 through 7 of the previous section,

Programming Keymover on the previous page.

However, this time in step 6, make the destination

mode the same as the source mode (e.g., TV).You

will see the display change to [CLR KMVR].

continued on next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

USING KEYMOVER

Restoring Keymoved Keys to Default Settings

Restoring A Single Keymoved Key (continued)

Press SELECT once to clear the keymoved key.You

will see [DELETED] appear in the display, followed by

[EXIT SETUP]. The URC-8910 remote control will

automatically exit the programming mode and return

to normal operation.

Restoring All Keymoved Keys In A Single Mode

Perform steps 1 through 4 of the earlier section,

Programming Keymover on page 38. However, this

time in steps 3 and 4, make the source mode and

source key the same mode (e.g., TV).You will see the

display change to [CLR KMVR].

Press SELECT once to clear all keymoved keys from

this mode.You will see [DELETED] appear in the

display, followed by [EXIT SETUP]. The remote control

will automatically exit the programming mode and

return to normal operation.

Download from Www.Somanuals.com. All Manuals Search And Download.

USING CHANNEL SCAN

In the TV, VCR, DVD, SAT, and CBL modes, use the FAV key to start a

3-second scan of all favorite channels (if programmed – see

Programming Favorite Channel Scan below) and/or all channels for

the selected mode.

If Favorite Channel Scan has been set up, skip to

step 2. Otherwise, on the URC-8910 remote control

press TV, VCR, DVD, SAT, or CBL once.

Press FAV once.

• If Favorite Channel Scan has been set up, scanning

of favorite channels will start and, upon comple-

tion, continue to scan all channels upward for the

same device.

• If Favorite Channel Scan has not been set up,

scanning will start with the current channel, then

proceed to the next channel up, and continue

until all channels of the selected device is

scanned.You will see the LED (red light) and IR

transmission icon ( ) blink each time a channel

is scanned.

To stop scanning channels at any time, press any key

once (except the backlight key ).

PROGRAMMING FAVORITE CHANNEL SCAN

In the TV, VCR, DVD, SAT, or CBL mode, you can store a list of up to

10 favorite channels, in any order, that will be immediately scanned

when FAV is pressed (see Using Channel Scan above).

NOTE: Only channels of one mode can be stored for Favorite Channel Scan.

On the URC-8910 remote control, press and hold

SET until you see the display change from the cur-

rent device and time to [CODE SET].

NOTE: The device, its code, and time are examples. Your

remote control settings may be different.

NOTE: To exit programming at any time, press EXIT once or

allow 30 seconds of inactivity to lapse. You will see [EXIT

SETUP] as the remote control returns to normal operation.

NOTE: [INVALID] means you have inadvertently pressed an

incorrect key. Note your error and continue programming.

continued on next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

PROGRAMMING FAVORITE CHANNEL SCAN

(continued)

(x 4) Press the L key four times until you see the display

change to [FAV CHAN].

NOTE: If you go past [FAV CHAN], press the M key one or

more times to return to it.

Press SELECT once to begin programming.You will

see the display change to the last-selected device

(e.g., [VCR]).

Select a mode (e.g., TV) for favorite channel

scanning and press it once. Then press Press SELECT

once.You will see the display change to [FAV].

Use the keypad to enter a favorite channel number

(e.g., 031). The display will show your entry.

NOTE: If the original remote control required pressing an

Enter key to change the channel, also press the ENTER key

after the channel number (e.g., 0-3-1-ENTER). However, the

display will not show the ENTER key.

NOTE: If you made a mistake during entry, press any

number key one or more times until you see the display

clear out. Then try entering the correct numbers again.

Press SELECT once.You will see the display clear out,

ready for your next entry.

If desired, repeat step 5 for each favorite channel to

be stored, up to a total of 10 channels.

NOTE: Once the tenth channel is entered, the remote control

will automatically exit programming.

(Optional) To exit programming, press and hold

SELECT until you see [SUCCESS] appear in the

display, followed by [EXIT SETUP]. The URC-8910

remote control will automatically exit the program-

ming mode and return to normal operation.

Download from Www.Somanuals.com. All Manuals Search And Download.

USING THE HOME THEATER MODE

The URC-8910 remote control includes a custom Home Theater

mode. After the HOME THEATER key is programmed, it will allow you

to access five groups of remote control keys without having to

change device modes. However, there are some considerations.

• Keymoved and Learned functions, as well Macros programmed

onto keys other than the dedicated macro keys (M1 ~ M3), are

affected by the Home Theater mode. If keys are moved (using

Keymover) or learned onto (using Learning) and they are placed

on keys not within the Control Groups, the keys will be ignored

when pressed.

• A Macro on the POWER key (if applicable) will carry over to the

Home Theater mode.

Control Organization

About Control Groups

For Home Theater programming, the URC-8910 remote control’s

keys are grouped by type of control into the following five

control groups:

(1) Playback Controls: PLAY, STOP, FWD, REW, F.FWD, F.REW, PAUSE,

and REC

(2) Audio Controls:

VOL+, VOL-, and MUTE

(3) Channel Controls: CH+, CH-, (Keypad) 0 ~ 9, ENTER, LAST,

SLEEP, INFO, and TV/VID

(4) Menu Controls:

MENU, GUIDE, Cursor Controls (L, M,

SELECT, and EXIT

(5) PIP Controls:

PIP, MOVE, and SWAP

About Device Groups

Moreover, the URC-8910 remote control’s devices are grouped into

the following five device groups:

(1) Playback Group: VCR, DVD, CD, CBL, SAT, and RCVR/AMP

(2) Audio Group:

TV, VCR, CBL, SAT, DVD, CD, RCVR/AMP, and

AUX

(3) Channel Group: TV, VCR, CBL, SAT, DVD, CD, RCVR/AMP, and

AUX

(4) Menu Group:

(5) PIP Group:

TV, VCR, CBL, SAT, and DVD

TV, VCR, CBL, and SAT

continued on next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

USING THE HOME THEATER MODE

Control Organization

About Device Groups (continued)

The default Device Group settings from the factory is:

(1) Playback Group: VCR

(2) Audio Group:

(3) Channel Group: CBL

(4) Menu Group:

(5) PIP Group:

CBL

Programming The Home Theater Mode

For example, let’s assume you have a TV, a cable converter, and a VCR

in your home theater system.You can set up the Home Theater mode

so that selected controls are assigned to these devices as follows:

On the URC-8910 remote control, press and hold

SET until you see the display change from the cur-

rent device and time to [CODE SET].

NOTE: The device, its code, and time are examples. Your

remote control settings may be different.

NOTE: To exit programming at any time, press EXIT once or

allow 30 seconds of inactivity to lapse. You will see [EXIT

SETUP] as the remote control returns to normal operation.

NOTE: [INVALID] means you have inadvertently pressed an

incorrect key. Note your error and continue programming.

(x 3) Press the L key three times until you see the display

change to [THEATER].

NOTE: If you go past [THEATER], press theM key one or

more times to return to it.

Press SELECT once to begin programming.You will

see the display change to [PLAYBACK].

NOTE: The program will automatically step through each

Control Group (from Playback to PIP) as you perform steps

3 through 7. However, you can use the ^Lor M keys to navi-

gate to a specific group to make further changes.

Download from Www.Somanuals.com. All Manuals Search And Download.

a. Press SELECT once to enter Playback Control

Group assignment.You will see the display change

to the last-selected device (e.g., [TV]).

b. Select a device for Playback Control Group assign-

ment. For this example, press VCR once. This will

assign the entire group of Playback Controls (i.e.,

PLAY, STOP, FF, REW, F.FWD, F.REW, PAUSE, and

REC) to the VCR.You will see the display change

to your device choice (e.g., [VCR]).

c. Press SELECT once to accept the assignment in

step 3b.You will see the display change to the next

Control Group assignment, [AUDIO]).

Press SELECT once to enter Audio Control Group

assignment.You will see the display change to the

last-selected device (e.g., [VCR]).

a. Select a device for Audio Control Group assign-

ment. For this example, press TV once. This will

assign the entire group of Audio Controls (i.e.,

VOL+, VOL-, and MUTE) to the TV.You will see the

display change to your device choice (e.g., [TV]).

b. Press SELECT once to accept the assignment in

step 4a.You will see the display change to the next

Control Group assignment, [CHANNEL]).

Press SELECT once to enter Channel Control Group

assignment.You will see the display change to the

last-selected device (e.g., [TV]).

continued on next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

USING THE HOME THEATER MODE

Programming The Home Theater Mode

5. (continued)

a. Select a device for Channel Control Group assign-

ment. For this example, press CBL once. This will

assign the entire group of Channel Controls (i.e.,

CH+, CH-, (Keypad) 0 ~ 9, ENTER, LAST,

SLEEP, INFO, and TV/VID) to the cable converter.

You will see the display change to your device

choice (e.g., [CBL]).

b. Press SELECT once to accept the assignment in

step 5b.You will see the display change to the next

Control Group assignment, [MENU]).

Press SELECT once to enter Menu Control Group

assignment.You will see the display change to the

last-selected device (e.g., [CBL]).

a. Select a device for Menu Control Group assignment.

For this example, press CBL once. This will assign

the entire group of Menu Controls (i.e., MENU,

GUIDE, Cursor Controls (L,M,

),SELECT,and

EXIT) to the cable converter.You will see the display

change to your device choice (e.g., [CBL]).

b. Press SELECT once to accept the assignment in

step 6a.You will see the display change to the next

Control Group assignment, [PIP]).

Press SELECT once to enter PIP Control Group

assignment.You will see the display change to the

last-selected device (e.g., [CBL]).

a. Select a device for PIP Control Group assignment.

For this example, press TV once. This will assign

the entire group of PIP Controls (i.e., PIP, MOVE,

and SWAP) to the TV.You will see the display

change to your device choice (e.g., [TV]).

Download from Www.Somanuals.com. All Manuals Search And Download.

b. Press SELECT once to accept the assignment in

step 7a.You will see the display change to the first

Control Group assignment, [PLAYBACK]).

At this point, all Control Groups have been assigned.

To change an assignment, use the L or M keys to

navigate to a specific group and make changes by

repeating the appropriate step (3, 4, 5, 6, or 7).

Otherwise, to exit programming, press and hold

SELECT until you see [SUCCESS] appear in the dis-

play, followed by [EXIT SETUP]. The URC-8910

remote control will automatically exit the program-

ming mode and return to normal operation.

Operating The Home Theater Mode

After programming the Home Theater mode (see the previous

section), you simply activate it by pressing HOME THEATER once.

Instantly, groups of URC-8910 remote control keys will be assigned

to their programmed devices.

For the above example (in the previous section), pressing HOME

THEATER once would assign the following keys to the VCR, TV, and

cable converter:

VCR:

PLAY, STOP, FF, REW, F.FWD, F.REW, PAUSE, and REC

VOL+, VOL-, MUTE, PIP, MOVE, and SWAP

Cable Converter: CH+, CH-, (Keypad) 0 ~ 9, ENTER, LAST, SLEEP,

INFO, TV/VID, MENU, GUIDE, Cursor Controls (L, M,

), SELECT, and EXIT

Download from Www.Somanuals.com. All Manuals Search And Download.

USING COMMERCIAL SKIP

The URC-8910 remote control includes a unique Commercial Skip

feature, once programmed, that will allow you to skip viewing com-

mercials by pressing the COM SKIP key. Then, as you change chan-

nels (to view another program without commercials), an internal

timer will count down a preset time interval before returning the

device to the original channel.

Programming Commercial Skip

For example, let’s assume you are watching a national sports event

on channel 2 that consistently breaks for one-minute commercials.

Meanwhile, cable channel 26 is showing a favorite action movie

without commercials. By performing the following steps, you can set

Commercial Skip to automatically return the cable converter to the

sports event after one minute of viewing the movie:

NOTE: Commercial Skip only works in the following modes: TV, VCR, DVD,

CBL, and SAT.

Select the device where channels will be changed

(e.g., CBL).

On the URC-8910 remote control, press and hold

COM SKIP until you see the display change from the

current device and time to [CHANNEL].

NOTE: The device, its code, and time are examples. Your

remote control settings may be different.

NOTE: To exit programming at any time, press EXIT once or

allow 30 seconds of inactivity to lapse. You will see [EXIT

SETUP] as the remote control returns to normal operation.

NOTE: [INVALID] means you have inadvertently pressed an

incorrect key. Note your error and continue programming.

Use the keypad to enter a favorite channel number

(e.g., 002). The display will show your entry.

NOTE: If the original remote control required pressing an

Enter key to change the channel, also press the ENTER key

after the channel number (e.g., 0-0-2-ENTER). However, the

display will not show the ENTER key.

NOTE: If you made a mistake during entry, press EXIT once.

You will see [EXIT SETUP] as the remote control returns to

normal operation. Then try programming Commercial Skip

again starting with step 1.

Press SELECT once to accept your channel entry.You

will see the display change to [30 SEC].

Download from Www.Somanuals.com. All Manuals Search And Download.

If desired, press L (or M) one or times to select a

different time interval.Your choices are 30 (default),

60, 90, 120, 150, or 180 seconds. For this example,

select 60 seconds.

Press SELECT once to accept the 60-second setting.

You will see [SUCCESS] appear in the display,

followed by [EXIT SETUP]. The URC-8910 remote

control will automatically exit the programming

mode and return to normal operation.

Operating Commercial Skip

In our example, let’s assume you are watching a national sports

event on cable channel 2 and it looks like a commercial is about to

appear. Immediately, press COM SKIP once and then enter channel

26 (e.g. 026).

The cable converter will switch to channel 26 and, after 1 minute,

automatically return to channel 2. The next time a commercial

appears, try pressing COM SKIP once, followed by PREV once to

activate the same sequence.

For a more powerful Commercial Skip technique, try programming

these steps into an open macro key (see Using Macros on page 34).

This way you will be able to press one key to switch channels and

return after a preset time.

Download from Www.Somanuals.com. All Manuals Search And Download.

RESTORING FACTORY DEFAULT SETTINGS

The URC-8910 remote control includes an Operation Reset program

that you can use to restore the unit to factory default settings.

IMPORTANT: Executing this program will erase all custom settings,

including Home Theater assignments, Macros, Learned Keys, Keymoved

Keys, and all device assignments.

On the URC-8910 remote control, press and hold

SET until you see the display change from the cur-

rent device and time to [CODE SET].

NOTE: The device, its code, and time are examples. Your

remote control settings may be different.

NOTE: To exit programming at any time, press EXIT once or

allow 30 seconds of inactivity to lapse. You will see [EXIT

SETUP] as the remote control returns to normal operation.

NOTE: [INVALID] means you have inadvertently pressed an

incorrect key. Note your error and continue programming.

(x 2) Press the L key twice until you see the display

change to [OPS RESET].

NOTE: If you go past [OPS RESET], press theM key one or

more times to return to it.

Press SELECT once to begin programming.You will

see the display change to [CLR SETUP].

Press SELECT once to start the process.You will see

the display change to [RESET RAM] as the active

memory is cleared, followed by [RESET E2] as the

preprogrammed memory is restored.

Then you will see [EXIT SETUP] as the URC-8910

remote control automatically exits the programming

mode and returns to normal operation.

Download from Www.Somanuals.com. All Manuals Search And Download.

ABOUT UPGRADING

The URC-8910 remote control has the largest infrared code library

available. However, if you purchase a brand new home entertain-

ment or home automation device, it may not respond to the codes

stored in the remote control’s memory.

If this happens, please contact our Customer Support department

(see Customer Support on page 74) to upgrade the URC-8910 remote

control. The Customer Support representative will search our entire

database for a code that matches your device and instruct you how

to enter it into your URC-8910 remote control.

If the code for your home entertainment or home automation device

is not in our database, we will need to “capture” the code for that

device from its original remote control.A new code would then be

created and entered into your URC-8910 remote control. If necessary,

the Customer Support representative can instruct you how to begin

the capture procedure.

NOTE: One For All reserves the right to replace a returned remote control with

a new one of equal or superior functionality.

Upgrade Exclusions

• Home entertainment or home automation devices controlled by

radio frequency (RF/UHF), wired, or ultrasonic remote controls.

Only devices controlled by infrared remote controls are covered.

• Home entertainment or home automation devices not controlled

by remote controls.

• Broken or defective product.

• Products that operate over 100 kHz.

• Infrared keyboards and infrared pointing devices (such as

mouse substitutes).

• All products for sale and/or use outside the continental United

States, Hawaii, Alaska, or Canada.

SPECIFICATIONS

Remote Control Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 AAA Batteries

Remote Control Dimensions

(H x W x D). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2⁄16 x 2-10⁄16 x 2-3⁄16 in.

(H x W x D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232 x 65 x 31 mm

Remote Control Weight (without Batteries) . . . . . . . . . . . . . . . . . . . . . . . . 8 oz (220 g)

NOTE: Specifications are typical. Individual units might vary. Specifications

are subject to change and improvement without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

PROBLEM:

SOLUTION:

PROBLEM:

SOLUTION:

LCD (Liquid Crystal Display) begins to fade, does not

appear, or the LOW BATTERY ( )icon appears.

Replace the batteries with four (4) new AAA alkaline

batteries (see page 4).

LED (red light) and IR ( ) icon blinks when you press a

key, but home entertainment device does not respond.

Be sure to select the correct device key for the device you

want to control.Also, aim the URC-8910 remote control

at the device not farther than 15 feet away.

PROBLEM:

SOLUTION:

The URC-8910 remote control does not control home

entertainment devices or commands do not work properly.

Try all listed codes for the device brands being set up.

Make sure they originally can be operated with an

infrared remote control.

PROBLEM:

SOLUTION:

TV/VCR combo does not respond properly.

Use the VCR codes for your brand. Some combo units may

require both a TV code and a VCR code for full operation.

PROBLEM:

SOLUTION:

The URC-8910 remote control does not turn on Sony or

Sharp TV/VCR Combo.

For Power On, these products require programming TV

codes. For Sony, use TV code 0000 and VCR code 0032.

For Sharp, use TV code 0093 and VCR code 0048.

PROBLEM:

SOLUTION:

Changing channels does not work properly.

If original remote control required pressing ENTER to

change channels, press ENTER on the URC-8910 remote

control after entering the channel number.

PROBLEM:

SOLUTION:

During learning, the display shows an [ERROR] message

after pressing and holding a key to be learned.

A bad capture has occurred.Avoid high-ambient light

sources, such as direct daylight and fluorescent bulbs.

Also, try readjusting positions of remote controls before

performing the procedure again. Make sure the key(s)

on the original remote control is (are) operating correctly.

PROBLEM:

SOLUTION:

CH+ and CH- do not work for your RCA TV.

Due to RCA design (1983-1987), only the original remote

control will operate these functions.

PROBLEM:

SOLUTION:

No remote control of volume.

See Using Volume Lock on page 32 to lock/unlock the

volume controls.

PROBLEM:

SOLUTION:

The URC-8910 remote control turns on audio devices and

controls volume, but does not change preset channels.

Some products may need both a Tuner/Receiver code

and an Audio Amplifier code for remote control of all

features on your audio device.

Download from Www.Somanuals.com. All Manuals Search And Download.

PROBLEM:

SOLUTION:

PROBLEM:

SOLUTION:

Tried Search For Your Code method and still could not find

a working code.

Your device may be newer than the URC-8910 remote

control. See About Upgrading on page 51.

Your satellite (DSS) receiver does not respond to the codes

listed on page 18.

Make sure the satellite (DSS) receiver can be operated

with an Infrared (IR) remote control and is not set up to

receive only Radio Frequency (RF) signals.

ERROR MESSAGES

A wrong key sequence or incorrect data has

been entered. Try entry again.

Requested manufacturer’s code has not been

found in the remote control’s database. Try

another code.

Macro sequence being entered has reached the

maximum limit of 15 keystrokes. Try entry

again with fewer keystrokes.

A complete cycle of code search in the

URC-8910 remote control’s database has been

reached. Try another code search or contact

Customer Support (see page 74)

An error has occurred during a learning or

programming sequence. Try entry again.

Indicates a check result of E2 status is either

bad or is not present. Contact Customer

Support (see page 74).

Indicates data captured during learning has

filled the URC-8910 remote control’s memory.

Try deleting older learned keys to free up

memory space (see page 31).

Indicates data captured during learning has

caused a error in the URC-8910 remote con-

trol’s memory. Try learning again.

Download from Www.Somanuals.com. All Manuals Search And Download.

KEY INDEX

Audio Amplifier Functions

Press RCVR/AMP once to control your audio

amplifier.

Press POWER once to turn on or off the

selected device (e.g, RCVR/AMP).

Use GUIDE to display your audio amplifier’s

program guide or setup menu.

Use INFO to display the audio amplifier’s

program information.

Use SELECT to set the surround sound. Use L

(or M) to adjust the volume higher (or lower).

Use (or ) to adjust the balance left (or

right).

Use VOL+ (or VOL-) to raise (or lower) the

audio amplifier’s audio volume.

Press MUTE once to turn the audio amplifier’s

audio off or on.

Use CH+ (or CH-) to select the audio amplifier’s

next higher (or lower) station (if applicable).

Use PREV to change the radio band

(if applicable).

Use the keypad (1 ~ 9 and 0) to

select audio sources (e.g., 1~ 10). If

the original remote control required

pressing an Enter key to change the

audio source, also press the ENTER

key after the source number (e.g.,

9-ENTER).

Press ENTER once after entering the source

numbers on some audio amplifiers.

Use TV/VID to switch the audio amplifier

between input and output.

Download from Www.Somanuals.com. All Manuals Search And Download.

Use the transport keys to control

your CD player (if applicable).

Use SLEEP to activate your audio amplifer’s

sleep timer (not available for all devices).

After programming, press M1 ~ M3 once to

run a desired macro (see Using Macros on

page 34).

After programming, press L1 ~ L4

once to activate a learned function.

See Using Learning on page 29.

Use to turn on or off the key backlight.

When this feature is activated, keys will

remain backlit for 5 seconds after the last key

press. In the setup mode, backlighting

will remain on for 30 seconds.

Use SET for all programming sequences.

Audio Cassette Deck Functions

Press AUX once to control your audio cassette

deck. See Re-assigning Device Keys on page 37.

Press POWER once to turn on or off the

selected device (e.g, AUX).

Use GUIDE to display your audio cassette

deck’s program guide (if applicable).

Use INFO to display the audio cassette deck’s

program information.

Use the cursor keys (L, M, , or ) to move

the cursor in the audio cassette deck’s pro-

gram guide and menu screens. Use SELECT to

choose options from the menu or guide.

Use VOL+ (or VOL-) to raise (or lower) the

audio cassette deck’s audio volume

(if applicable).

continued on next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

KEY INDEX

Audio Cassette Deck Functions (continued)

Press MUTE once to turn the audio cassette

deck’s audio off or on (if applicable).

Use the keypad (1 ~ 9 and 0) to

directly select tracks. If the original

remote control required pressing an

Enter key to select a track, also press

the ENTER key after the track number

(e.g., 1-2-ENTER).

Use TV/VID to switch the audio cassette deck

between input and output.

Use the transport keys to control

your audio cassette deck.

After programming, press M1 ~ M3 once to

run a desired macro (see Using Macros on

page 34).

After programming, press L1 ~ L4

once to activate a learned function.

See Using Learning on page 29.

Use to turn on or off the key backlight.

When this feature is activated, keys will

remain backlit for 5 seconds after the last key

press. In the setup mode, backlighting

will remain on for 30 seconds.

Use SET for all programming sequences.

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Receiver Functions

Press RCVR/AMP once to control your audio

receiver.

Press POWER once to turn on or off the

selected device (e.g, RCVR/AMP).

Use GUIDE to display your audio receiver’s

program guide or setup menu.

Use INFO to display the audio receiver’s

program information.

Use SELECT to set the surround sound. Use L

(or M) to adjust the volume higher (or lower).

Use (or ) to adjust the balance left (or

right).

Use VOL+ (or VOL-) to raise (or lower) the

audio receiver’s audio volume.

Press MUTE once to turn the audio receiver’s

audio off or on.

Use CH+ (or CH-) to select the audio receiver’s

next higher (or lower) station (if applicable).

Use PREV to change the radio band

(if applicable).

Use the keypad (1 ~ 9 and 0) to

select audio sources (e.g., 1~ 10). If

the original remote control required

pressing an Enter key to change the

audio source, also press the ENTER

key after the source number (e.g.,

9 -ENTER).

Press ENTER once after entering the source

numbers on some audio receivers.

Use TV/VID to switch the audio receiver

between input and output.

continued on next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

KEY INDEX

Audio Receiver Functions (continued)

Use the transport keys to control

your CD player (if applicable).

Use SLEEP to activate your audio receiver’s

sleep timer (not available for all devices).

After programming, press M1 ~ M3 once to

run a desired macro (see Using Macros on

page 34).

After programming, press L1 ~ L4

once to activate a learned function.

See Using Learning on page 29.

Use to turn on or off the key backlight.

When this feature is activated, keys will

remain backlit for 5 seconds after the last key

press. In the setup mode, backlighting

will remain on for 30 seconds.

Use SET for all programming sequences.

Audio Turntable Functions

Press AUX once to control your audio turn-

table. See Re-assigning Device Keys on page 32.

Press POWER once to turn on or off the

selected device (e.g, AUX).

Use GUIDE to display your audio turntable’s

program guide (if applicable).

Use INFO to display the audio turntable’s

program information.

Use SELECT to select a disc. Use L (or M) to

select the next (or previous) LP. Use (or

to select the next (or previous) track.

)

Download from Www.Somanuals.com. All Manuals Search And Download.

Use VOL+ (or VOL-) to raise (or lower) the

audio turntable’s audio volume (if applicable).

Press MUTE once to turn the audio turntable’s

audio off or on (if applicable).

Use the keypad (1 ~ 9 and 0) to

directly select tracks. If the original

remote control required pressing an

Enter key to select a track, also press

the ENTER key after the track number

(e.g., 1-2-ENTER).

Use the transport keys to control

your audio turntable (if applicable).

After programming, press M1 ~ M3 once to

run a desired macro (see Using Macros on

page 34).

After programming, press L1 ~ L4

once to activate a learned function.

See Using Learning on page 29.

Use to turn on or off the key backlight.

When this feature is activated, keys will

remain backlit for 5 seconds after the last key

press. In the setup mode, backlighting

will remain on for 30 seconds.

Use SET for all programming sequences.

Download from Www.Somanuals.com. All Manuals Search And Download.

KEY INDEX (Continued)

Cable Converter Functions

Press CBL once to control your cable

converter.

Press POWER once to turn on or off the

selected device (e.g, SAT).

Press MENU once to display your cable

converter’s main menu.

Use GUIDE to display your cable converter’s

program guide or setup menu.

Use EXIT to exit from your cable converter’s

guide or menu.

Use INFO to display the cable converter’s

current channel and program information.

Use the cursor keys (L, M, , or ) to move

the cursor in the cable converter’s program

guide and menu screens. Use SELECT to

choose options from the menu or guide.

Use VOL+ (or VOL-) to raise (or lower) the

cable converter’s audio volume (if applicable).

Press MUTE once to turn the cable converter’s

audio off or on (if applicable).

Use FAV to scan favorite channels and/or all

channels. See Using Channel Scan and Program-

ming Favorite Channel Scan on page 41.

Use CH+ (or CH-) to select the cable convert-

er’s next higher (or lower) channel.

Press PREV once to recall the last-viewed

channel and to page back one screen on the

cable converter’s main menu.

Use the keypad (1 ~ 9 and 0) to

directly select channels (e.g., 009 or

031). If the original remote control

required pressing an Enter key to

change the channel, also press the

ENTER key after the channel number

(e.g., 0-3-1-ENTER).

Download from Www.Somanuals.com. All Manuals Search And Download.

Press ENTER once after entering the channel

numbers on some TVs.

Use TV/VID to switch the TV’s input to view

TV or cable programs.

Use the transport keys to control

your cable converter’s VOD service

(if applicable).

Use SLEEP to activate your cable converter’s

sleep timer (not available for all devices).

After programming, press M1 ~ M3 once to

run a desired macro (see Using Macros on

page 34).

After programming, press L1 ~ L4

once to activate a learned function.

See Using Learning on page 29.

Use PIP to switch the Picture-In-Picture

feature on or off (if available on your TV).

Use MOVE to move the window picture

to different positions in the main picture.

Use SWAP to switch images and sound

between the main and window pictures.

After programming, use COM SKIP to skip

commercials on your cable converter. See

Using Commercial Skip on page 48.

Use to turn on or off the key backlight.

When this feature is activated, keys will

remain backlit for 5 seconds after the last key

press. In the setup mode, backlighting

will remain on for 30 seconds.

Use SET for all programming sequences.

Download from Www.Somanuals.com. All Manuals Search And Download.

KEY INDEX (continued)

CD Player Functions

Press CD once to control your CD player.

Press POWER once to turn on or off the

selected device (e.g, CD).

Use GUIDE to display your CD player’s

program guide.

Use INFO to display the CD player’s current

channel and program information.

Use SELECT to select a compact disc. Use L

(or M) to select the next (or previous) CD.

Use (or ) to select the next (or previous)

track.

Use VOL+ (or VOL-) to raise (or lower) the

CD player’s audio volume (if applicable).

Press MUTE once to turn the CD player’s

audio off or on (if applicable).

Use the keypad (1 ~ 9 and 0) to

directly select tracks. If the original

remote control required pressing an

Enter key to select a track, also press

the ENTER key after the track number

(e.g., 1-2-ENTER).

Use the transport keys to control

your CD player.

After programming, press M1 ~ M3 once to

run a desired macro (see Using Macros on

page 34).

After programming, press L1 ~ L4

once to activate a learned function.

See Using Learning on page 29.

Download from Www.Somanuals.com. All Manuals Search And Download.

Use to turn on or off the key backlight.

When this feature is activated, keys will

remain backlit for 5 seconds after the last key

press. In the setup mode, backlighting

will remain on for 30 seconds.

Use SET for all programming sequences.

DVD Player Functions

Press DVD once to control your DVD player.

Press POWER once to turn on or off the

selected device (e.g, DVD).

Press MENU once to display your DVD player’s

main menu.

Use GUIDE to display your DVD player’s

program guide.

Use EXIT to exit from your DVD player’s guide

or menu.

Use INFO to display the DVD player’s current

channel and program information.

Use the cursor keys (L, M, , or ) to move

the cursor in the DVD player’s program guide

and menu screens. Use SELECT to choose

options from the menu or guide.

Use VOL+ (or VOL-) to raise (or lower) the

DVD player’s audio volume (if applicable).

Press MUTE once to turn the DVD player’s

audio off or on (if applicable).

Use FAV to scan favorite channels and/or all

channels. See Using Channel Scan and Program-

ming Favorite Channel Scan on page 41.

Use the keypad (1 ~ 9 and 0) to

directly select chapters (e.g., 09 or

31). If the original remote control

required pressing an Enter key to

select a chapter, also press the ENTER

key after the chapter number

(e.g., 3-1-ENTER).

continued on next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

KEY INDEX

DVD Player Functions (continued)

Use TV/VID to switch the TV’s input to view

TV or DVD programs.

Use the transport keys to control

your DVD player.

After programming, press M1 ~ M3 once to

run a desired macro (see Using Macros on

page 34).

After programming, press L1 ~ L4

once to activate a learned function.

See Using Learning on page 29.

Use to turn on or off the key backlight.

When this feature is activated, keys will

remain backlit for 5 seconds after the last key

press. In the setup mode, backlighting

will remain on for 30 seconds.

Use SET for all programming sequences.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Automation Functions

Press AUX once to control home automation.

See Re-assigning Device Keys on page 37.

Press POWER once to turn on home

automation.

Use VOL+ (or VOL-) to brighten (or dim) the

lights controlled by home automation.

Press MUTE once to turn off home

automation.

Use CH+ (or CH-) to turn home automation

on (or off).

After programming, press M1 ~ M3 once to

run a desired macro (see Using Macros on

page 34).

After programming, press L1 ~ L4

once to activate a learned function.

See Using Learning on page 29.

Use to turn on or off the key backlight.

When this feature is activated, keys will

remain backlit for 5 seconds after the last key

press. In the setup mode, backlighting

will remain on for 30 seconds.

Use SET for all programming sequences.

Download from Www.Somanuals.com. All Manuals Search And Download.

KEY INDEX

LD (Laser Disc) Player Functions

Press AUX once to control home automation.

See Re-assigning Device Keys on page 37.

Press POWER once to turn on or off the

selected device (e.g, AUX).

Press MENU once to display your LD player’s

main menu.

Use GUIDE to display your LD player’s

program guide.

Use EXIT to exit from your LD player’s guide

or menu.

Use INFO to display the LD player’s current

channel and program information.

Use the cursor keys (L, M, , or ) to move

the cursor in the LD player’s program guide

and menu screens. Use SELECT to choose

options from the menu or guide.

Use VOL+ (or VOL-) to raise (or lower) the

LD player’s audio volume (if applicable).

Press MUTE once to turn the LD player’s

audio off or on (if applicable).

Use the keypad (1 ~ 9 and 0) to

directly select chapters (e.g., 09 or

31). If the original remote control

required pressing an Enter key to

select a chapter, also press the ENTER

key after the chapter number

(e.g., 3-1-ENTER).

Use TV/VID to switch the TV’s input to view

TV or LD programs.

Use the transport keys to control

your LD player.

Download from Www.Somanuals.com. All Manuals Search And Download.

After programming, press M1 ~ M3 once to

run a desired macro (see Using Macros on

page 34).

After programming, press L1 ~ L4

once to activate a learned function.

See Using Learning on page 29.

Use to turn on or off the key backlight.

When this feature is activated, keys will

remain backlit for 5 seconds after the last key

press. In the setup mode, backlighting

will remain on for 30 seconds.

Use SET for all programming sequences.

Satellite Receiver Functions

Press SAT once to control your satellite

receiver.

Press POWER once to turn on or off the

selected device (e.g, SAT).

Press MENU once to display your satellite

receiver’s main menu.

Use GUIDE to display your satellite receiver’s

program guide or setup menu.

Use EXIT to exit from your satellite receiver’s

guide or menu.

Use INFO to display the satellite receiver’s

current channel and program information.

Use the cursor keys (L, M, , or ) to move

the cursor in the satellite receiver’s program

guide and menu screens. Use SELECT to

choose options from the menu or guide.

Use VOL+ (or VOL-) to raise (or lower) the

satellite receiver’s audio volume (if applicable).

Press MUTE once to turn the satellite receiver’s

audio off or on (if applicable).

Use FAV to scan favorite channels and/or all

channels. See Using Channel Scan and Program-

ming Favorite Channel Scan on page 41.

continued on next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

KEY INDEX

Satellite Receiver Functions (continued)

Use CH+ (or CH-) to select the satellite

receiver’s next higher (or lower) channel.

Press PREV once to recall the last-viewed

channel and to page back one screen on the

satellite receiver’s main menu.

Use the keypad (1 ~ 9 and 0) to

directly select channels (e.g., 009 or

031). If the original remote control

required pressing an Enter key to

change the channel, also press the

ENTER key after the channel number

(e.g., 0-3-1-ENTER).

Press ENTER once after entering the channel

numbers on some TVs.

Use TV/VID to switch the TV’s input to view

TV or satellite programs.

Use the transport keys to control

your satellite receiver’s PVR or VOD

service (if applicable).

Use SLEEP to activate your satellite receiver’s

sleep timer (not available for all devices).

After programming, press M1 ~ M3 once to

run a desired macro (see Using Macros on

page 34).

After programming, press L1 ~ L4

once to activate a learned function.

See Using Learning on page 29.

Use PIP to switch the Picture-In-Picture

feature on or off (if available on your TV).

Use MOVE to move the window picture

to different positions in the main picture.

Use SWAP to switch images and sound

between the main and window pictures.

Download from Www.Somanuals.com. All Manuals Search And Download.

After programming, use COM SKIP to skip

commercials on your satellite receiver. See

Using Commercial Skip on page 48.

Use to turn on or off the key backlight.

When this feature is activated, keys will

remain backlit for 5 seconds after the last key

press. In the setup mode, backlighting

will remain on for 30 seconds.

Use SET for all programming sequences.

TV Functions

Press TV once to control your television.

Press POWER once to turn on or off the

selected device (e.g, TV).

Press MENU once to display your TV’s

main menu.

Use GUIDE to display your TV’s program

guide or setup menu.

Use EXIT to exit from your TV’s guide

or menu.

Use INFO to display the TV’s current channel

and program information.

Use the cursor keys (L, M, , or ) to move

the cursor in the TV’s program guide and

menu screens. Use SELECT to choose options

from the menu or guide.

Use VOL+ (or VOL-) to raise (or lower) the

TV’s audio volume.

Press MUTE once to turn the TV audio off

or on.

Use FAV to scan favorite channels and/or all

channels. See Using Channel Scan and Program-

ming Favorite Channel Scan on page 41.

continued on next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

KEY INDEX

TV Functions (continued)

Use CH+ (or CH-) to select the TV’s next

higher (or lower) channel.

Press PREV once to recall the last-viewed

channel and to page back one screen on the

TV’s main menu.

Use the keypad (1 ~ 9 and 0) to

directly select channels (e.g., 009 or

031). If the original remote control

required pressing an Enter key to

change the channel, also press the

ENTER key after the channel number

(e.g., 0-3-1-ENTER).

Press ENTER once after entering the channel

numbers on some TVs.

Use TV/VID to switch the TV’s input to view

TV or video programs.

Use the transport keys to control

your VCR.

To record a VCR program, press REC

twice.

Use SLEEP to activate your TV’s sleep

timer (not available for all devices).

After programming, press M1 ~ M3 once to

run a desired macro (see Using Macros on

page 34).

After programming, press L1 ~ L4

once to activate a learned function.

See Using Learning on page 29.

Use PIP to switch the Picture-In-Picture

feature on or off (if available on your TV).

Use MOVE to move the window picture

to different positions in the main picture.

Use SWAP to switch images and sound

between the main and window pictures.

Download from Www.Somanuals.com. All Manuals Search And Download.

After programming, use COM SKIP to skip

commercials on your TV. See Using

Commercial Skip on page 48.

Use to turn on or off the key backlight.

When this feature is activated, keys will

remain backlit for 5 seconds after the last key

press. In the setup mode, backlighting

will remain on for 30 seconds.

Use SET for all programming sequences.

VCR Functions

Press VCR once to control your VCR.

Press POWER once to turn on or off the

selected device (e.g, VCR).

Press MENU once to display your VCR’s

main menu.

Use GUIDE to display your VCR/PVR’s

program guide or setup menu (if applicable).

Use EXIT to exit from your VCR’s guide

or menu.

Use the cursor keys (L, M, , or ) to move

the cursor in the VCR’s program guide and

menu screens. Use SELECT to choose options

from the menu or guide.

Use VOL+ (or VOL-) to raise (or lower) the

VCR’s audio volume (if applicable).

Press MUTE once to turn the VCR audio off

or on (if applicable).

Use FAV to scan favorite channels and/or all

channels. See Using Channel Scan and Program-

ming Favorite Channel Scan on page 41.

Use CH+ (or CH-) to select the TV’s next

higher (or lower) channel.

continued on next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

KEY INDEX

VCR Functions (continued)

Press PREV once to recall the last-viewed

channel and to page back one screen on the

VCR’s main menu.

Use the keypad (1 ~ 9 and 0) to

directly select channels (e.g., 009 or

031). If the original remote control

required pressing an Enter key to

change the channel, also press the

ENTER key after the channel number

(e.g., 0-3-1-ENTER).

Press ENTER once after entering the channel

numbers on some VCRs.

Use TV/VID to switch the TV’s input to view

TV or VCR programs.

Use the transport keys to control

your VCR.

To record a VCR program, press REC

twice.

Use SLEEP to activate your VCR’s sleep

timer (not available for all devices).

After programming, press M1 ~ M3 once to

run a desired macro (see Using Macros on

page 34).

After programming, press L1 ~ L4

once to activate a learned function.

See Using Learning on page 29.

Use PIP to switch the Picture-In-Picture

feature on or off (if available on your TV).

Use MOVE to move the window picture

to different positions in the main picture.

Use SWAP to switch images and sound

between the main and window pictures.

Download from Www.Somanuals.com. All Manuals Search And Download.

Use to turn on or off the key backlight.

When this feature is activated, keys will

remain backlit for 5 seconds after the last key

press.In the setup mode,backlighting

will remain on for 30 seconds.

Use SET for all programming sequences.

LIMITED WARRANTY

One For All® warrants, to the original purchaser only, that this

product will be free from defects in materials and workmanship,

under normal use, for ninety (90) days from the date of original

purchase.

This limited warranty is valid only on ONE FOR ALL® product

purchased and used in the United States of America or Canada,and

does not apply to products used for industrial or commercial pur-

pose.

The limited warranty does not cover damage or failure caused by

products or services not supplied by ONE FOR ALL® , or which

result from accident, misuse, abuse, neglect, mishandling, misap-

plication, faulty installation, set-up adjustment, improper mainte-

nance, alteration, maladjustment of consumer controls, modifica-

tions, commercial use, or that is attributable to acts of God.

There are no express warranties except as listed above. ONE FOR

ALL® SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSE-

QUENTIAL DAMAGES RESULTING FROM THE USE OF THIS

PRODUCT OR ARISING OUT OF ANY BREACH OF WARRANTY.

ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY

PERIOD SET FORTH ABOVE. Some states do not allow the exclu-

sion or limitation of incidental or consequential damages, or limi-

tations on how long an implied warranty lasts, so the above exclu-

sions or limitations may not apply to you. This warranty gives you

specific legal rights and you may also have other rights which vary

from state to state.

To obtain warranty service for a defective product during the war-

ranty period, please return the product, preferably in the original

carton, along with your purchase receipt, to the store of original

purchase. A note detailing the complaint would be helpful. The

store, at its option, will replace or repair this product if found to be

defective.

One For All: 330-405-8655 (for Warranty only)

Download from Www.Somanuals.com. All Manuals Search And Download.

CUSTOMER SUPPORT

For assistance, please contact us in any of the following ways:

• E-mail: [email protected]

• Internet: http://www.oneforall.com

• Consumer Help Line: (330) 405-8616

ADDITIONAL INFORMATION

As you update your home entertainment system, One For All® has

a universal remote control that will fit your needs. Look for these

exciting products at a retailer near you.

One For All Access 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-3605

One For All Video Expert 4 Device . . . . . . . . . . . . . . . . . . . . URC-4081

One For All Video Expert Plus 4L

Upgradeable Remote Control with Learning. . . . . . . . . . . . URC-4880

One For All Access 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-4605

One For All Access 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-5705

One For All 6 Home Theater . . . . . . . . . . . . . . . . . . . . . . . . . URC-6011

One For All 8 Home Theater . . . . . . . . . . . . . . . . . . . . . . . . . URC-8011

One For All 8L Home Theater with Learning . . . . . . . . . . . URC-8811

One For All A/V Producer 8 Device Learner . . . . . . . . . . . . URC-8911

One For All IR/RF Home Producer 8 Device Learner. . . . . URC-9911

ONE FOR ALL® is the registered trademark of Universal Electronics

Inc. Computime International Ltd. is the Licensee of the ONE FOR

ALL® brand for USA and Canada.

cation may be reproduced, transmitted, transcribed, stored in any

retrieval system, or translated to any language, in any form or by any

means, electronic, mechanical, magnetic, optical, manual, or otherwise,

without the prior written permission of Universal Electronics Inc.

The One For All A/V LCD 8-Device With Learning Universal Remote

Control (URC-8910) is compatible for use in North America,

excluding Mexico.

URC-8910B00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04/02

Download from Www.Somanuals.com. All Manuals Search And Download.

MANUFACTURER’S CODES

Setup Codes for Audio Amplifiers:

0078

0892

0331

0165

0321,0892

0321

0395

0892

0395

0321

0689

0078

0331

0078

0354

Harman/Kardon

JVC

Luxman

Marantz

Nakamichi

Optimus

Philips

Polk Audio

Realistic

Sansui

Sony

Soundesign

Victor

Wards

Yamaha

Setup Codes For Audio Cassette Decks:

Sony

0243

Setup Codes for Audio Receivers:

ADC

0531

Aiwa

0121,1089,1405

Bose

1229

Capetronic

Carver

0531

1089,1189

Compaq

Denon

1136

1104,1160

Harman/Kardon

Hewlett Packard

JBL

0110

1181

0110

JVC

0074

Kenwood

MCS

0186,1027,1313,1569,1570

0039

Magnavox

Marantz

Onkyo

0531,1089,1189

0039,1089,1189

0135

Optimus

Panasonic

Philips

Pioneer

Proscan

Quasar

0531,0670,0186,1023

0039,1518

1089,1189,1269

0531,0014,0150,0630,1023

1254

0039

RCA

0531,1023,1254

Download from Www.Somanuals.com. All Manuals Search And Download.

Sansui

1089

Sharp

0186

Sony

1058,1158,1258

Soundesign

Sunfire

Technics

Thorens

Victor

0670

1313

0039,1308,1309,1518

1189

0074

Wards

0014

Yamaha

0176,0186,1176

Setup Codes For Audio Turntables:

Aiwa

Carver

Magnavox

Marantz

Philips

0188

Setup Codes for Cable Converters:

ABC

0003,0017

0899

0476,0810

0144

0009,0273

0003,0476,0276,0810

0000

Americast

Bell South

General Instrument

GoldStar

Hamlin

Jerrold

Memorex

Motorola

Pace

0476,1106

0237

Panasonic

Paragon

Philips

Pioneer

Pulsar

0000,0107

0000

0305,0317

0144,0533,0877

0000

Quasar

0000

Regal

Runco

0273,0279

0000

Samsung

Scientific Atlanta

Sony

0144

0477,0017,0877

1006

Starcom

Supercable

Toshiba

0003

0276

0000

Zenith

0000,0525,0899

Download from Www.Somanuals.com. All Manuals Search And Download.

MANUFACTURER’S CODES (continued)

Setup Codes For CD Players:

Aiwa

Burmester

0157,0124

0420

California Audio Labs 0029,0303

Carver

0157,0179,0437

DKK

0000

Denon

Emerson

Fisher

0003,0873

0305

0179,0174

Garrard

Genexxa

Harman/Kardon

Hitachi

JVC

0420,0393

0032,0305

0157,0173

0032

0072

Kenwood

Krell

0028,0037,0190,0626,0681,0826

0157

LXI

0305

Linn

0157

MCS

0029

MTC

0420

Magnavox

Marantz

Mission

NSM

0157,0305

0029,0157,0180,0626

0157

Nikko

0174

Onkyo

Optimus

Panasonic

Parasound

Philips

Pioneer

Polk Audio

Proton

QED

0101,0868

0000,0032,0179,0305,0037,0420,0145,0468,0437,1063

0029,0303

0420

0157,0626

0032,0305,0468,1062,1063

0157

Quasar

RCA

0029

0032,0179,0305,0053,0468,0764,1062

Realistic

Rotel

SAE

0179,0420,0180

0157,0420

0157

Sansui

Sanyo

0157,0305

0179

Scott

0305

Sears

0305

Sharp

0037,0180,0861

0180,1067

0157

Sherwood

Sonic Frontiers

Sony

0000,0185,0490

Download from Www.Somanuals.com. All Manuals Search And Download.

Soundesign

Tascam

Teac

Technics

Victor

0145

0420

0420,0393,0174,0180

0029,0303

0072

Wards

Yamaha

Yorx

0157,0053

0036,0187,0888

0461

Setup Codes For DAT (Digital Audio Tape) Recorders:

Carver

0158

Harman/Kardon

Magnavox

Marantz

Philips

Setup Codes For DVD Players:

Aiwa

0641

Apex

0672

Denon

Emerson

Fisher

0490,0634

0591

0670

GPX

0522,0717

0769

GoVideo

Gradiente

Harman/Kardon

Hitachi

Hiteker

JVC

Kenwood

Konka

Magnavox

Marantz

Mitsubishi

Onkyo

Optimus

Oritron

Panasonic

Philips

Pioneer

Princeton

Proscan

RCA

0715

0651

0582

0573,0664

0672

0558,0623

0534,0682

0711,0719,0720,0721

0503,0675

0539

0521

0503,0627

0571

0651

0490,0632

0503,0539

0525,0571,0632

0674

0522

0522,0571,0704,0717

0573

0670

Samsung

Sanyo

continued on next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

MANUFACTURER’S CODES (continued)

Setup Codes For DVD Players:

Sharp

0630

Sherwood

Sony

0633

0533

Technics

Techwood

Theta Digital

Toshiba

Yamaha

Zenith

0490

0692

0571

0503

0490,0545

0503,0591

Setup Codes For Home Automation:

0240

0167

0240

0167

One For All

RadioShack

Security System

Universal X10

X10

Setup Codes For LD (Laser Disc) Players:

Denon

Mitsubishi

NAD

Optimus

Pioneer

0059

Setup Codes For Misc. Audio Services:

Jerrold

Scientific Atlanta

Starcom

0459,0520

0460

0459

Setup Codes For Satellite Receivers:

AlphaStar

Chaparral

Echostar

Expressvu

0772

0216

0775,1005

0775

0566

General Instrument

HTS

0869

0775

Hitachi

0819

Hughes Network Sys.

JVC

0749,1142,1749

0775

Magnavox

0724,0722

Download from Www.Somanuals.com. All Manuals Search And Download.

Memorex

Mitsubishi

Next Level

Panasonic

Philips

0724

0749

0869

0701,0247

0749,0724,0722,1076,1142

Proscan

RCA

0392

0566,0143,0392,0855

RadioShack

Samsung

Sony

0869

1109

0639

Star Choice

Toshiba

Uniden

0869

0749,0790

0724,0722

0856

Zenith

Setup Codes For TVs:

AOC

0030,0019

Admiral

Aiko

0093,0463

0092

Aiwa

0701

Akai

0030

Alaron

0179

Ambassador

America Action

Ampro

0177

0180

0751

Anam

0180

Audiovox

Baysonic

Belcor

0451,0180,0092,0623

0180

0019

Bell & Howell

Bradford

Brockwood

Broksonic

CXC

0154,0016

0180

0019

0236,0463

0180

Candle

Carnivale

Carver

0030,0056

0030

0054

Celebrity

Cineral

Citizen

Concerto

Contec

0000

0451,0092

0060,0030,0056,0092

0056

0180

Craig

0180

Crosley

Crown

0054

0180

Curtis Mathes

0047,0054,0154,0051,0451,0093,0060,0030,0145,0056,

0016,0166,0466,0747,1147,1347

Daewoo

0451,0019,0092,0623,0624

continued on next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

MANUFACTURER’S CODES

Setup Codes For TVs (continued):

Daytron

Denon

0019

0145

Dumont

Dwin

0017,0019

0720,0774

Electroband

Emerson

Envision

Fisher

0000

0154,0236,0463,0180,0178,0019,0179,0177,0623,0624

0030

0154

Fujitsu

0179,0683

Funai

0180,0179,0171

Futuretech

0180

0047,0051,0451,0093,0178,0021,0747,1147,1347

Gibralter

GoldStar

Gradiente

Grunpy

Hallmark

Harley Davidson

Harman/Kardon

Harvard

Hitachi

Infinity

Inteq

0017,0030,0019

0030,0178,0019,0056

0053,0056

0180,0179

0178

0179

0054

0180

0145,0056,0016,0151

0054

0017

JBL

0054

JCB

0000

JVC

0053

KEC

0180

KTV

0180,0030

Kenwood

Konka

0030,0019

0628,0632,0638,0703,0707

0056

LXI

0047,0054,0154,0156,0178,0747

Logik

0016

Luxman

MGA

0056

0150,0030,0178,0019

MTC

0060,0030,0019,0056

Magnavox

Majestic

Marantz

Matsushita

Megatron

Memorex

Midland

Minutz

Mitsubishi

Motorola

0054,0030,0179,1254

0016

0054,0030

0250

0178,0145

0154,0250,0463,0150,0178,0179,0056,0016

0047,0017,0051,0747

0021

0093,0150,0178,0019

0093

Download from Www.Somanuals.com. All Manuals Search And Download.

Multitech

NAD

NEC

0180

0156,0178,0166

0030,0019,0056

0092

NTC

Nikko

Onwa

0030,0178,0092

0180

Optimus

Optonica

Orion

Panasonic

Penney

0154,0250,0166

0093

0236,0463,0179

0051,0250

0047,0156,0051,0060,0030,0178,0021,0019,0056,0747,

1347

Philco

Philips

Pilot

Pioneer

Portland

Princeton

Prism

0054,0463,0030,0145,0019

0054

0030,0019

0166,0679

0019,0092

0717

0051

Proscan

Proton

Pulsar

Quasar

RCA

0047,0747

0178,0466

0017,0019

0051,0250

0047,0051,0093,0019,0090,0679,0747,1047,1147,1247,

1347,1447

RadioShack

Realistic

Runco

0047,0154,0180,0030,0178,0019,0056,0747

0154,0180,0030,0178,0019,0056

0017,0030,0603

SSS

0180,0019

Sampo

Samsung

Sansei

0030

0060,0030,0178,0019,0056

0451

Sansui

0463

Sanyo

0154

Scimitsu

Scotch

0019

0178

Scott

0236,0180,0178,0019,0179

Sears

0047,0054,0154,0156,0178,0179,0056,0171,0747

Semivox

Semp

0180

0156

Sharp

0093,0688

Shogun

Signature

Sony

0019

0016

0000

Soundesign

Squareview

Starlite

Supreme

Sylvania

0180,0178,0179

0171

0180

0000

0054,0030

continued on next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

MANUFACTURER’S CODES

Setup Codes For TVs (continued):

Symphonic

TMK

0180,0171

0178,0056,0177

TNCi

0017

Tandy

0093

Technics

Technol Ace

Techwood

Teknika

0051,0250

0179

0051,0056

0054,0180,0150,0060,0019,0179,0056,0016,0092

Telefunken

Toshiba

0056

0154,0156,0060,1256

Vector Research

Victor

0030

0053

Vidikron

Vidtech

0054

0178,0019

Wards

White Westinghouse

Yamaha

0054,0030,0178,0021,0019,0179,0056,0016

0463,0623,0624

0030,0019

Zenith

0017,0463,0016,0092,0624

Setup Codes For TV/VCR Combos:

Broksonic

Citizen

0002,0479 (for TV use 0463)

0278

Colt

0072

Curtis Mathes

Daewoo

Emerson

0035 (for TV use 0051)

0278 (for TV use 0624)

0002,0278 (for TV use 0624),0294 (for TV use 0236),

0479 (for TV use 0463)

Funai

0000

0035 (for TV use 0051),0048 (for TV use 0093),

0060 (for TV use 0047),0240

GoldStar

Harley Davidson

Hitachi

0037 (for TV use 0056)

0000

Lloyd’s

0000

Magnasonic

Magnavox

Magnin

0278,0563

0000,0081 (for TV use 0054)

0240

Memorex

MGA

0037,0162 (for TV use 0250),1037,1162,1262

0240

Mitsubishi

Optimus

Orion

0048 (for TV use 0093)

0162 (for TV use 0250),1162,1262

0000,0479 (for TV use 0463)

Panasonic

0035 (for TV use 0051),0162 (for TV use 0250),1162,

1262

Penney

Quasar

0035 (for TV use 0051),0037 (for TV use 0056),0240

0035 (for TV use 0051),0162 (for TV use 0250)

Download from Www.Somanuals.com. All Manuals Search And Download.

MANUFACTURER’S CODES

Setup Codes For TVs (continued):

Symphonic

TMK

0180,0171

0178,0056,0177

TNCi

0017

Tandy

0093

Technics

Technol Ace

Techwood

Teknika

0051,0250

0179

0051,0056

0054,0180,0150,0060,0019,0179,0056,0016,0092

Telefunken

Toshiba

0056

0154,0156,0060,1256

Vector Research

Victor

0030

0053

Vidikron

Vidtech

0054

0178,0019

Wards

White Westinghouse

Yamaha

0054,0030,0178,0021,0019,0179,0056,0016

0463,0623,0624

0030,0019

Zenith

0017,0463,0016,0092,0624

Setup Codes For TV/VCR Combos:

Broksonic

Citizen

0002,0479 (for TV use 0463)

0278

Colt

0072

Curtis Mathes

Daewoo

Emerson

0035 (for TV use 0051)

0278 (for TV use 0624)

0002,0278 (for TV use 0624),0294 (for TV use 0236),

0479 (for TV use 0463)

Funai

0000

0035 (for TV use 0051),0048 (for TV use 0093),

0060 (for TV use 0047),0240

GoldStar

Harley Davidson

Hitachi

0037 (for TV use 0056)

0000

Lloyd’s

0000

Magnasonic

Magnavox

Magnin

0278,0563

0000,0081 (for TV use 0054)

0240

Memorex

MGA

0037,0162 (for TV use 0250),1037,1162,1262

0240

Mitsubishi

Optimus

Orion

0048 (for TV use 0093)

0162 (for TV use 0250),1162,1262

0000,0479 (for TV use 0463)

Panasonic

0035 (for TV use 0051),0162 (for TV use 0250),1162,

1262

Penney

Quasar

0035 (for TV use 0051),0037 (for TV use 0056),0240

0035 (for TV use 0051),0162 (for TV use 0250)

Download from Www.Somanuals.com. All Manuals Search And Download.

RadioShack

RCA

1037

0035 (for TV use 0051),0048 (for TV use 0093),

0060 (for TV use 0047),0240

Sansui

Sanyo

0000,0479 (for TV use 0463)

0240

Sears

Sharp

Sony

Sylvania

Symphonic

Thomas

White Westinghouse

Zenith

0000,0037 (for TV use 0056)

0048 (for TV use 0093)

0000,0032 (for TV use 0000)

0081 (for TV use 0054)

0000,0563

0000

0278 (for TV use 0624)

0000,0637 (for TV use 0624)

Setup Codes For VCRs:

Admiral

Adventura

Aiko

0048,0209

0000

0278

Aiwa

0037,0000

Akai

0041

America Action

American High

Asha

0278

0035

0240

Audiovox

Beaumark

Bell & Howell

Broksonic

CCE

0037

0240

0104

0184,0121,0209,0002,0479

0072,0278

Calix

0037

Canon

0035

Carver

0081

Cineral

0278

Citizen

0037,0278

Colt

0072

Craig

0037,0047,0240,0072

Curtis Mathes

Cybernex

Daewoo

Denon

0060,0035,0041,0162,0760

0240

0045,0278

0042

Dynatech

Electrohome

Electrophonic

Emerex

Emerson

Fisher

0000

0037

0032

0037,0184,0000,0121,0043,0209,0002,0278,0479

0047,0104

Fuji

0035,0033

Funai

0000

0060,0035,0048,0240,0760

continued on next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

MANUFACTURER’S CODES

Setup Codes For VCRs (continued):

Garrard

0000

GoVideo

GoldStar

Gradiente

HI-Q

0432

0037,0038

0000

0047

Harley Davidson

Harman/Kardon

Harwood

Hitachi

0000

0081,0038

0072

0000,0042,0041

Hughes Network Sys.

JVC

0042

0067,0041

Jensen

0041

KEC

0037,0278

KLH

0072

Kenwood

Kodak

0067,0041,0038

0035,0037

LXI

0037

Lloyd’s

0000

Logik

0072

MEI

0035

MGA

0240,0043

MGN Technology

MTC

0240

0240,0000

Magnasonic

Magnavox

Magnin

0278

0035,0039,0081,0000,0149,0563

0240

Marantz

Marta

0035,0081

0037

Matsushita

Memorex

0035,0162

0035,0037,0048,0039,0047,0240,0000,0104,0209,0162,

0479,1037,1162,1262

Minolta

Mitsubishi

Motorola

Multitech

NEC

0042

0048,0067,0043

0035,0048

0000,0072

0104,0067,0041,0038

Nikko

0037

Noblex

Olympus

Optimus

Orion

0240

0035

0037,0048,0104,0162,0432,1048,1062,1162,1262

0184,0209,0002,0479

Panasonic

Penney

Pentax

0035,0162,0225,0616,1062,1162,1262,1362

0035,0037,0240,0042,0038

0042

Philco

0035,0209,0479

Philips

Pilot

0035,0081,0618,1081,1181

0037

Download from Www.Somanuals.com. All Manuals Search And Download.

Pioneer

Polk Audio

Profitronic

Proscan

Protec

0067

0081

0240

0060,0760

0072

Pulsar

0039

Quasar

0035,0162,1162

RCA

0060,0035,0048,0240,0042,0149,0760

RadioShack

Radix

0000,1037

0037

Randex

Realistic

ReplayTV

Runco

0037

0035,0037,0048,0047,0000,0104

0614,0616

0039

STS

0042

Samsung

Sanky

0240,0045

0048,0039

Sansui

0000,0067,0209,0041,0479

Sanyo

0047,0240,0104

Scott

0184,0045,0121,0043

Sears

0035,0037,0047,0000,0042,0104

Semp

0045

Sharp

0048

Shintom

Shogun

Singer

0072

0240

0072

Sony

0035,0032,0000,0033,0636,1032

Sylvania

Symphonic

TMK

0035,0081,0000,0043

0000

0240

Tatung

0041

Teac

0000,0041

0035,0162

0035,0037,0000

0000

0618,0636

0045,0043

0037,0240

0240

Technics

Teknika

Thomas

Tivo

Toshiba

Totevision

Unitech

Vector

0045

Vector Research

Video Concepts

Videosonic

Wards

0038

0045

0240

0060,0035,0048,0047,0081,0240,0000,0042,0072,0149,

0760

White Westinghouse

XR-1000

Yamaha

0209,0072,0278

0035,0000,0072

0038

Zenith

0039,0000,0209,0033,0479

Download from Www.Somanuals.com. All Manuals Search And Download.

MANUFACTURER’S CODES (continued)

Setup Codes For Video Accessories:

Archer

GC Electronics

Jebsee

Magnavox

Panasonic

Philips

0160

0818

1120

0818

1010

0160

1126

1010

0850

Pioneer

RadioShack

Sensory Science

Sharp

Sony

Download from Www.Somanuals.com. All Manuals Search And Download.

Napoleon Fireplaces Indoor Fireplace Savoy User Manual
National Instruments Graphics Tablet NI 5620 User Manual
NETGEAR Network Router WG602 User Manual
Nokia Cell Phone 2160 User Manual
Omega Network Card 208H User Manual
Oster Toaster TSSTTRDFL1 User Manual
Ozaki Worldwide Portable Speaker Dotadot101 User Manual
Panasonic Computer Monitor CF 08 User Manual
Panasonic Laptop CF W7Mk3 User Manual
Paradyne Network Router 6212 I1 User Manual